IPD 6K0106 Rear Front Wagon Lowering Springs 240 1.75 1.5

( Brand: Ipd ), ( Manufacturer Part Number: 6K0106 ), ( Type: Lowering Springs ), ( Placement On Vehicle: Rear, Front )

Review IPD Volvo 240 Wagon Lowering Springs 1.75 Front 1.5 Rear Part# fits 1985–1991

The IPD 6K0106 lowering springs are specifically designed for Volvo 240 Wagons manufactured between 1985 and 1991. These springs provide a subtle yet noticeable reduction in vehicle ride height, enhancing both the aesthetic appeal and handling characteristics of your Volvo.

The front springs measure 1.75 inches in diameter and are engineered to deliver a slightly stiffer suspension setup. This results in a more responsive and agile driving experience, allowing your Volvo 240 Wagon to corner more confidently and maintain better composure during high-speed maneuvers.

The rear springs, on the other hand, measure 1.5 inches in diameter. While they offer a slightly softer spring rate than their front counterparts, they still contribute to the overall lowered look and improved handling. These springs help balance out the vehicle's weight distribution, ensuring that your Volvo maintains its composure and remains stable even when loaded with passengers and cargo.

The IPD 6K0106 lowering springs are manufactured using high-quality steel and are shot-peened to increase their strength and durability. This process also helps to reduce the risk of fatigue fractures, ensuring that your springs can withstand the rigors of daily driving and provide consistent performance for thousands of miles.

Installing these springs on your Volvo 240 Wagon is a straightforward process that can typically be completed in a few hours using common hand tools. They are designed to work seamlessly with your vehicle's stock dampers and shocks, allowing you to maintain your factory-installed suspension components while still enjoying the benefits of a lowered ride height.

In summary, the IPD 6K0106 lowering springs offer a stylish and performance-enhancing upgrade for your Volvo 240 Wagon. They provide a subtle yet noticeable reduction in ride height, improve handling characteristics, and are manufactured using high-quality materials for strength and durability. Installing these springs on your Volvo is a straightforward process that can be completed using common hand tools.

Pros and Cons of Installing IPD 6K0106 Volvo 240 Wagon (1985-1991) Lowering Springs (1.75 front, 1.5 rear)

1. **Improved Appearance:** The primary reason for installing lowering springs is to enhance the vehicle's look. These springs will lower the car's ride height, making it appear sportier and more aggressive.

2. **Improved Handling:** Lowering the center of gravity of the vehicle can lead to improved handling. The car will be less prone to body roll during cornering, making the driving experience more enjoyable.

3. **Reduced Roll Sway:** The lower ride height will also reduce the amount of roll sway experienced during high-speed turns, further enhancing the handling capabilities.

4. **Risk of Bottoming Out:** One of the main downsides to installing lowering springs is the increased risk of bottoming out. The car may come into contact with speed bumps, driveway entrances, and other road hazards more easily, potentially causing damage to the vehicle.

5. **Reduced Ground Clearance:** The lower ride height also means less ground clearance, which may make it more difficult to navigate through rough terrain or deep puddles.

6. **Cost:** The cost of purchasing and installing the lowering springs can be a significant investment. While the upfront cost may be substantial, the long-term benefits, such as improved handling and appearance, may justify the expense for some.

7. **Increased Wear on Suspension Components:** The added stress on the suspension components due to the lowered ride height can lead to increased wear and tear. This may result in the need for more frequent maintenance or replacement of these parts.

8. **Possible Impact on Ride Comfort:** The stiffer springs used in lowering kits can result in a less comfortable ride, particularly over rough roads.

Installing IPD 6K0106 Volvo 240 Wagon (1985-1991) Lowering Springs (1.75 front, 1.5 rear) comes with both advantages and disadvantages. The primary benefits include improved appearance, handling, and reduced roll sway. However, there are also potential downsides, such as the increased risk of bottoming out, reduced ground clearance, cost, increased wear on suspension components, and possible impact on ride comfort. Ultimately, the decision to install these springs depends on an individual's priorities and preferences.

If you prioritize a sportier appearance and improved handling, installing IPD 6K0106 Volvo 240 Wagon (1985-1991) Lowering Springs (1.75 front, 1.5 rear) could be a worthwhile investment. However, if you value ride comfort or frequently encounter rough terrain, you may want to consider other alternatives or modifications. It's essential to weigh the pros and cons carefully and consider your specific driving habits and preferences before making a decision.

Details:

Manufactured by IPD with the part number 6K0106, these springs are compatible Volvo 240 Wagon model's from 1985 to 1991, providing a perfect fit and reliable quality for your car suspension needs. The Volvo 240 Wagon 1985 - 1991 Lowering Springs by IPD are designed to enhance the suspension of your vehicle providing a controlled and stable ride. With a 1.75-inch front and 1.5-inch rear drop, these lowering springs offer sleek custom look while also improving handling overall performance.

part #: 6k0106 prices

• $149.95-$178.49

specifications coilspringi:

• for makes: Volvo
• for years: 1985-1991
• brand: Ipd
• mpn: 6k0106
• type: Lowering Springs
• placement on vehicle: Rear, Front

general coilspringi:

• Car Truck Parts Accessories > Steering Suspension > Leaf Coil Springs
• condition: New

returns coilspringi:

• policy: No Returns

offer coilspringi:

• sold: 0
• quantity: 1
• started: February 27, 2026
• best offers: True
• availability: In Stock
• options: Ship-to-home

payments coilspringi:

• wallet: Paypal
• credit card: Mastercard
• other

shipping coilspringi:

• transit: 3-6 Days
• cost: $0.00
• type: Calculated
• class: Standard
• carrier: FedEx
• service: FedEx Ground / FedEx Home Delivery

seller coilspringi:

• rating: 100.0%
• # reviews: 21
• city: Houston, Texas